Bird Spikes
Pest X Polycarbonate Bird Spikes: Pest X Bird Spikes are perfect for preventing roosting and perching of birds on ledges, rails, pipes, balconies & awnings. They are plastic bird spikes consisting of a single row of spikes. The major advantage of pest X bird spike is its once only initial cost and long-term effects. Pest X bird spike is manufactured from polycarbonate, combining the clarity of glass with the toughness of metal. Polycarbonate is UV resistant and will remain stable and does not become brittle like normal plastics. Installation of Pest-X bird spikes is a simple task; all that is required is a pair of snips and neutral cure silicone. The product is easily cut to size and prior to gluing the product down the surface must be cleaned of all grease, dirt and other debris. For Bird control on thin ledges, one row of Pest-X bird spike is required. There are three types of bird spike in the AVIPOINT 'P' series range: Avipoint P14 bird spikes - Avipoint P20 bird spikes - Avipoint P32 bird spikes. The number refers to the number of spikes on each strip. AVIPOINT™ P14 Bird Spikes are quicker to install than other bird deterrent systems. To improve effectiveness the bird spike must be carefully selected to suit the species of bird and level of infestation. Longer bird spike are required for gull proofing and a greater density of bird spike for heavier infestations. It is also important that bird spike are appropriate for the width of ledge involved, positioned correctly, and secured effectively with appropriate adhesive or clips. AVIPOINT™ P14 Bird Spikes are far less visible than plastic ones because they do not reflect sunlight and attract far less dirt, continuing to remain tidy and unobtrusive over an extended period. Low profile bases should be specified to reduce visibility from the ground, with translucent plastic blending well into most building surfaces. Although Avipoint Bird Spikes are by far the easiest proofing system; a whole host of things can substantially improve installation ease and speed. Closely-stacked strips that fit easily to hand, for instance, allow the greatest number to be carried and fixed at a time. Snap lines in the bases make it easy to break strips down to the right size. Glue guides enable rapid, mess-free adhesive application. And specially developed clips are invaluable in proofing gutters, windows and beams. An AVIPOINT P32 Bird Spike is a device consisting of long, needle-like rods used for bird control. An AVIPOINT P32 Bird Spike can be attached to building ledges, street lighting, and commercial signage to prevent wild or feral birds from perching or roosting. Birds can produce large quantities of unsightly and unhygienic feces, and some birds have very loud calls that can be inconvenient for nearby residents, especially at night. As a result, An AVIPOINT P32 Bird spikes are used to deter these birds without causing them harm or killing them. Described as "the most effective (type of) stand-alone bird deterrent", An AVIPOINT P32 Bird Spike can be placed along ledges, walls, on top of commercial signage, closed circuit television cameras and in rain gutters, in order to prevent birds from perching on the surfaces.
About the Author
 |
JohnQ123 Bird Spikes offers bird spikes made by Avipoint for the prevention of bird to stop landing on unwanted areas. We are the largest seller of p14 stainless steel spikes. |
